WIFI temperature controller with two relay outputs. Suitable for swimming pools, ponds and other applications. Socket outlet version (EU plug). Plug-and-play design. It can be used as overtemperature protection and as an automatic temperature control system for various electrical appliances. It can be connected to cooling and heating appliances to achieve ideal temperature control.
Precise temperature measurement and control
Exact water temperature measurement of the swimming pool.
Wireless
Access via app via WIFI via app.
WIFI temperature control
- Plug-and-play design, easy to use
- Can increase or decrease the temperature depending on the current settings and ambient conditions
- Display of measurements in Celsius or Fahrenheit
- Maximum output load: 1100 W (110 V)
- Measure and set the temperature at the same time.
- Temperature calibration (if required)
- Option to set high and low temperature alarms
- Overtemperature and sensor error alarm
- Free WiFi INKBIRD APP (IOS 11.0 + or Android 5.0+)
- CE-certified
- EU plugs / sockets
- Large and clear LCD displays with target temperature and actual temperature
- Double heating and cooling function
- Automatic overtemperature and sensor error alarm
- Compressor delay protection for cooling control
- With Wifi controller + free “InkSmart” app (IOS / Android), so you can monitor and set the temperature anywhere.
- When used in a swimming pool, you can optionally order a connection set for pipe mounting or, with the “Retractable cable probe” variant, hang the probe in the pool or skimmer.
Easy installation in the filter system of your swimming pool (optional)
- The cable probe of the pool thermometer can be easily integrated in the technical room with a tapping clamp (available for 40 mm, 50 mm and 63 mm pipes). New piping is not necessary.
- The temperature probe is inserted into the integrated immersion sleeve with a thermally conductive paste (included in the scope of delivery) and screwed tight.
- The 2 meter cable of the temperature probe is permanently connected to the control unit.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Technical data of the WiFi pool thermometer set
Control unit with cable probe:
- Temperature control mode: On/off control, heating and cooling
- Temperature control range: -40 ~ 100 °C/-40 ~ 212 °F
- Temperature resolution: 0.1 °C/0.1 °F
- Temperature accuracy: ±1 °C (-50 ~ 70 °C)/±1 °F (-50 ~ 160 °F)
- Ambient temperature: -30 ~ 75 °C/-22 ~ 167 °F
- Input power: 100 ~ 240 VAC, 50 Hz/60 Hz
- Temperature control output: Max. 10 A, 100 V ~ 240 V AC
- Length of the input power cable: 1.5 m (5 feet)
- Length of the output power cable: 30 cm (1 foot)
- Sensor type: NTC sensor (supplied)
- Sensor length: 2 m / 6.56 feet
- Dimensions of the sensor probe: 50 mm x 6 mm
- Housing dimensions: 140 x 68 x 33 mm (5.5 x 2.7 x 1.3 inches)
- Socket (EU version): 135 x 54 x 40 mm (5.3 x 2.1 x 1.6 inches)
Technical data immersion sleeve (in the optionally available pipe mounting set):
- The screw connection is made of V2A (1.4301) and the protective tube is made of V4A (1.4571) stainless steel.
- Suitable for swimming pools with chlorine or bromine.
- Note for owners with a swimming pool with a salt electrolysis system: Since a few thread guides also come into contact with the medium (salt water in your case), we can not recommend the product for use with salt water . Some customers seal the screw thread so that there is no contact with salt water. We cannot give a guarantee for this.
Technical data tapping clamp (in the optionally available pipe mounting set):
- BSP pipe thread G, not self-sealing, sealing with Teflon tape or similar.
- Temperature range: 0 ° C to 80 ° C
- Working pressure: max. 16 bar at 20 ° C, reinforced internal thread
- Material PP
- O-ring: NBR
- Reinforcement ring / screws / nuts: Galvanized steel or higher quality
Delivery
- INKBIRD ITC-308-WIFI (plug-and-play device with 2m cable probe, EU socket connection)
- Pipe mounting kit for 40mm, 50mm or 63mm (Optional) includes: Tapping sleeve, Thermowell, Teflon tape, Screws, Heat conductive paste.
Downloads
Apps for IOS and Android if the WIFI gateway is also ordered:
Apps for IOS and Android for use via Bluetooth:
